mehdi22
Junior Member level 2
hi.
please , if we want design patch antenna in (*) fr=5.8 GHz , epr=2.2 ; h=1mm
me , i found
length (patch)=16.8984mm
width(patch)=20.4458 mm
the inset feed point distance (for adaptation)=5.193mm
i use transmission line model for design patch antenna!
but
in a publication , they found
length (patch)=16mm
width(patch)=9mm
in length there is no problem , because transmission model is an approximate model , but in width there is an 11 mm difference , can someone try to calculate dimensions of patch with the caracteristic in up(*)
----------
please , if we want design patch antenna in (*) fr=5.8 GHz , epr=2.2 ; h=1mm
me , i found
length (patch)=16.8984mm
width(patch)=20.4458 mm
the inset feed point distance (for adaptation)=5.193mm
i use transmission line model for design patch antenna!
but
in a publication , they found
length (patch)=16mm
width(patch)=9mm
in length there is no problem , because transmission model is an approximate model , but in width there is an 11 mm difference , can someone try to calculate dimensions of patch with the caracteristic in up(*)
----------