Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DEVELOPMENT OF A VIDEO CAPTURE CARD ON FPGA

Status
Not open for further replies.
M

mubi1134

Newbie level 4
Newbie level 4
Joined
Apr 20, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
india
Activity points
1,317
I HAVE TO DEVELOP A FPGA BASED VIDEO FRAME GRABBER WITH ON BOARD RAM THAT COULD ACQUIRE FRAMES WITH AT LEAST 1024*768 PIXEL RESOLUTION IN 24 BIT PALETTE.CARD SHOULD HAVE A VA INTERFACE AT ITS INPUT AND A USB 2.0 INTERFACE AT ITS OUTPUT. PLEASE GUIDE....

WHAT COMPRESSION TECHNIQUE SHOULD BE USED SO THAT USB 2.0 INTERFACE COULD HANDLE IT?

PLEASE REPLY
THANKS
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top