cameo_2007
Advanced Member level 3
- Joined
- Mar 15, 2007
- Messages
- 748
- Helped
- 70
- Reputation
- 142
- Reaction score
- 44
- Trophy points
- 1,308
- Location
- 12°58' N77°38'E
- Activity points
- 5,023
Hi
I am here to get an expert help.
I have a board designed for embedded applications,consisting of a processor,RAm,Rom etc.And i could see there are lot of de-coupling capacitors around those chips.
The problm is my board is not stable.Doesnt work sometimes.Does these decoupling capacitors got to do something with that.I figured a small error,i have assembled a 1uF/6.3V smd caps( i ahv only that value) instead of a 1uF/16V smd cap(told in the AN) which is for the RAM IC.Will that voltage difference create problms..?
Definitely need an expert opinion on this.
Regards,
I am here to get an expert help.
I have a board designed for embedded applications,consisting of a processor,RAm,Rom etc.And i could see there are lot of de-coupling capacitors around those chips.
The problm is my board is not stable.Doesnt work sometimes.Does these decoupling capacitors got to do something with that.I figured a small error,i have assembled a 1uF/6.3V smd caps( i ahv only that value) instead of a 1uF/16V smd cap(told in the AN) which is for the RAM IC.Will that voltage difference create problms..?
Definitely need an expert opinion on this.
Regards,