shahbaz.ele
Advanced Member level 1
- Joined
- Aug 12, 2008
- Messages
- 454
- Helped
- 72
- Reputation
- 146
- Reaction score
- 73
- Trophy points
- 1,308
- Location
- Islamabad, Pakistan
- Activity points
- 3,669
I am using HDB3 decoder IC for HDB3 to TTL/NRZL convertor.
for synchronization I need to use 74HC4046 PLL IC.
Input frequency is 2.048MHz
output should be the same 2.048MHz.
can anyone help me in this regard to select R1, R2 and C1.
and the rest of the components value related to VCO input.
Even in Proteus simulation this
IC is not working properly.
for synchronization I need to use 74HC4046 PLL IC.
Input frequency is 2.048MHz
output should be the same 2.048MHz.
can anyone help me in this regard to select R1, R2 and C1.
and the rest of the components value related to VCO input.
Even in Proteus simulation this
IC is not working properly.