Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

convert .s2p Real/Imaginary to Magnitude/Angle

Status
Not open for further replies.

banjaxed

Newbie level 2
Newbie level 2
Joined
Mar 12, 2004
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
17
convert s2p file

Hi , i have a .s2p file with the header

# Hz S RI R 50.00


As the RI stands for Real/Imaginary , i was wondering if there is any way of convering this file to Magnitude/Angle type ?
Would there be any free software avalible to do this ?


Thanks for any help.
 

convert imaginary to real

Hi,

You could download a 30 day trial of SPVIEW II from :

hxxp://www.arkrfsystems.com/ (replace xx with tt)


or SoftPlot from

hxxp://www.ph-technology.com

rgds, Al
 

convert real imaginary to magnitude angle

matlab is good
simply write a program to convert
c/c++ is one of the best choices
 

s2p converter

if you use microwave simulator then you should be able to inport your data file in this format then simulate it as subcircuit and get the result in any format you need as your software should be able to do
 

magnitude angle

thanks everyone for the help!
 

c++ real imaginary to magnitude angle

i vote the mathlab program that i think by equation and simple program u can obtian u want
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top