Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Conjugate poles-zeros

Status
Not open for further replies.

milvapp

Member level 5
Member level 5
Joined
Apr 17, 2010
Messages
88
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,288
Location
chania greece
Activity points
1,882
Compensation technique conjugate poles-zeros??

Hi all,

well I get these poles and zeros from my pole-zero analysis and I dont know how to get rid off the conjugate poles and zeros because they affect my dominant pole.




Any good suggestions(compensation technique)??

Thank you in advance,
Bill
 
Last edited:

should lower the loop gain more?
what's the corresponding schematic then
 
First of all thank you for replying.

Secondly the corresponding schematic is a simple Cherry Hooper amplifier.

I have to say that i figured out that you cant get rid off the conjugate zeros-poles with compensation.
You have to change values in your circuit.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top