Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Comparison of Image Processing performance on hardware and software FPGAs Problem

Status
Not open for further replies.
S

Starchasm Nyx

Newbie
Joined
Mar 26, 2022
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
45
Hi guys
Currently I am doing a project on performance comparison between xnor-popcnt and MAC edge detection on fpga hardware.
I've done the performance evaluation of it. But my lecturer wants me to be able to build some software on CPU that works around 100-400mhz (because of my edge detection on FPGA. tested for performance at 100-300Mhz) and power rating to compare performance like power and latency between FPGA hardware and software.
Can someone help me about image processing in software but running on microprocessor with CPU and how to measure power and delay of that software?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top