honey13
Member level 3
- Joined
- Apr 6, 2010
- Messages
- 55
- Helped
- 4
- Reputation
- 8
- Reaction score
- 4
- Trophy points
- 1,288
- Location
- Hyderabad, India
- Activity points
- 1,619
Hi all,
I am using pt for STA. In my design there is one Analog phy, i was provided an .lib file of the hard macro. During my sta i read that file using read_lib.
But the clocks that were in the phy are not available to my current design.
Do I need to redefine that phy clocks in my design? Is there any other approach to read the extracted timing models. My script is as follows:
set link_library tcbnxxx (&other libraries)
read_verilog temp.v
read_lib analog_lib.lib (hard macro)
Warning: Line 32715, Cell 'MADEF', There is a sequential timing arc with the
clkin1 non-clock pin for a related_pin attribute. (LBDB-30)
Warning: Line 32757, Cell 'MADEF', There is a sequential timing arc with the
clkin2 non-clock pin for a related_pin attribute. (LBDB-30)
clkin1 and clkin2 are the clocks in hard macro, do i need to define them again when i am integrating that phy into my design.
Provided .lib file is also generated by pt
Someone help me plz
I am using pt for STA. In my design there is one Analog phy, i was provided an .lib file of the hard macro. During my sta i read that file using read_lib.
But the clocks that were in the phy are not available to my current design.
Do I need to redefine that phy clocks in my design? Is there any other approach to read the extracted timing models. My script is as follows:
set link_library tcbnxxx (&other libraries)
read_verilog temp.v
read_lib analog_lib.lib (hard macro)
Warning: Line 32715, Cell 'MADEF', There is a sequential timing arc with the
clkin1 non-clock pin for a related_pin attribute. (LBDB-30)
Warning: Line 32757, Cell 'MADEF', There is a sequential timing arc with the
clkin2 non-clock pin for a related_pin attribute. (LBDB-30)
clkin1 and clkin2 are the clocks in hard macro, do i need to define them again when i am integrating that phy into my design.
Provided .lib file is also generated by pt
Someone help me plz