Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

circuit - need help to solve a network problem

Status
Not open for further replies.
R

renzworldc

Junior Member level 3
Joined
May 7, 2009
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,488
circuit

hello..
plz help me to solve this network problem.. by finding the load current??
I tried superposition th. but got stuck :cry:
 

circuit

sorry... the polarity of the voltage source is reversed.. I ve reloaded the correct circuit..
 

Re: circuit

Are you sure that you have uploaded now a correct circuit??? Because the 2nd 0.5ohm resistor is shorted.
 

circuit

yes... this same circuit is given in my book..!! do u mean the load resistance is shorted??
If the circuit is at fault... can u plz correct it..
 

Re: circuit

Load current is 0 amp. because the load resistor ( 0.5 ohms ) is shorted
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top