Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Can you help me with two questions?

Status
Not open for further replies.

vickychand_2000

Junior Member level 2
Junior Member level 2
Joined
Aug 9, 2004
Messages
22
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
188
1)What are advantages of active filters over passive filters.

2)Design analog circuit that can generate square and square root of given analog signal of 1v and 100Hz.
 

answer

1. The advantage of active filters is that one can provide amplification, and have a filter whose characteristic is independent of the load.

2. Visit here hxxp://ist-socrates.berkeley.edu/~phylabs/bsc/PSpice/OpAmps/OpAmps.html

wisely
 
No it is not hw just two questions in of my semester papers I found difficult to find a satisfactory answer.
 

wisely77 said:
answer

1. The advantage of active filters is that one can provide amplification, and have a filter whose characteristic is independent of the load.

2. Visit here hxxp://ist-socrates.berkeley.edu/~phylabs/bsc/PSpice/OpAmps/OpAmps.html

wisely

Thanks a lot it was very useful.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top