Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Can Soft microprocessor replace DSP's

Status
Not open for further replies.

lordsathish

Full Member level 5
Joined
Feb 11, 2006
Messages
246
Helped
33
Reputation
66
Reaction score
3
Trophy points
1,298
Location
Asia
Activity points
2,698
Hi all....
Can Soft microprocessor like microblaze, nios replace DSP processors...?
Or is there any soft DSP processor...?
Thanks
 

In opencores.org there are DSP implementations.
uBlaze is only a processor, but you can add to it real DSP capabilities connecting a DSP core to the faster LMB bus.
 

Does that mean, we cant have a DSP soft processor running in an FPGA...?
Is this because an FPGA implementation cannot match the performance of an real DSP processor...?
 

Of course you can implement a DSP processor into an FPGA and make it work, but DSP processor on FPGA performance will be lower that the performance of a similar DSP chip.
DSP on FPGA is preferred when you have to do the same fixed process all the time. In that case you do not implement a DSP soft processor; intead of that, you implement a DSP algorithm using the FPGA DSP structures (take a look at DSP Design Tools from Xilinx, for example). In this case, FPGA performance will be higher than the performance of a DSP processor doing the same process.
 

    lordsathish

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top