Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Buses not showing in Xilinx ISE RTL schematic

Status
Not open for further replies.

kmegamind

Junior Member level 1
Junior Member level 1
Joined
Oct 2, 2012
Messages
18
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Alexandria , Egypt.
Activity points
1,406
in Xilinx ise, when i view the RTL schematic of a module, some buses are connected between the i/o ports and the module and other buses are not connected, what is the reason for this ?
This is an example for what i mean :
Select signal and output are not connected, while the rest is.
Mux.png
 

use the "view technology sschematic"
then you will see all the primitives being used, and the connections.
 

Thnx
But technology schematic show the look up tables
I want to see the design with all of its buses in the register level
How can i do that ?
And why are certain buses trimmed and other appear ?
 

Thnx
But technology schematic show the look up tables
I want to see the design with all of its buses in the register level
How can i do that ?
And why are certain buses trimmed and other appear ?

from what i googled it look like the solution is to go back to an early version of xilinx and then it will show all connection (ise 8.2)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top