Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Broadband power amplifier transistor

Status
Not open for further replies.

bkd

Full Member level 2
Full Member level 2
Joined
Dec 18, 2005
Messages
120
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Activity points
2,105
Hi Everyone. Nice to meet you all
I need transistors for broadband power amplifier. Working frequency is from 6 to 9 GHz. Power out is about higher than 10dbm. Anyone know the kind of transistor please tell me.
THank you for your reading
 

have a look on the Eudyna www site, Ther specialise in uWave transistors

Dave
 

Avago, Mimix(Macom), etc. Maybe you can search distributed amplifier.
 

Thank you all
 

Hi all,
I am searching for a 10W (40dBm) PA IC.
Kindly suggest me the best available PA ICs in the market.
My requirement in that PA IC should not have complex impedance matching, 1GHz of freq band operation
& exhibits good return losses.

Kindly share some good application notes too based on designing of Good High Power Amplifier Boards.

Regards,
Rajan
 

Hi,

Any comments on the performance of Triquint's "Power Band" range of RF power amplifier ICs.
As per triquint these devices has wideband application and provides single impedance matching over the wideband.
Kindly give ur comments plz.

Regards,
rajan
 

try RFMD they have GaN transitor that working at your f band
 
Hello Dr. Rajan ^_^

---------- Post added at 23:29 ---------- Previous post was at 23:27 ----------

use 36163 36077 1225 ^_^
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top