Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Barium Strontate Titanium for Antenna

Status
Not open for further replies.

saran1975

Newbie level 2
Newbie level 2
Joined
Oct 30, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,291
Hi all,

I plan to design an antenna using Barium Strontate Titanium (replace copper) as propose by my supervisor.

I need you guys help where I can get all informations about this material especially in electrical and dielectric characteristic.
 

hello dear
this is well known material and all the properties are well studied .this material have high dieletric constant (more than 100) and low tangent loss (around 0.001).
you can refer some paper like "Microstructure and dielectric properties of ferroelectric barium strontium titanate ceramics prepared by hydrothermal method"
Hongyan Miao & Yaohui Zhou & Guoqiang Tan &Min Dong in J Electroceram.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top