Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

AWK and Physical Design

Status
Not open for further replies.

pd_engineer

Newbie level 5
Newbie level 5
Joined
May 21, 2008
Messages
10
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,341
hi all,

Just to be prepared before starting a project, Wat are common situations in which we need to use awk scripting while doing Physical Design.

Thanks
 

If you need to post-process a netlist or DEF file, awk might be useful.
 

pd_engineer said:
hi all,

Just to be prepared before starting a project, Wat are common situations in which we need to use awk scripting while doing Physical Design.

Thanks

you can also use awk to filter out the required data from the reports generated during various PD steps..
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top