Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Auxiliary (peaking) Doherty power amplifier

Status
Not open for further replies.
M

Mabrok

Full Member level 4
Joined
Mar 1, 2017
Messages
223
Helped
0
Reputation
0
Reaction score
1
Trophy points
18
Activity points
1,597
The drain current of aux when simulated standalone is totally different from that one simulated in full DPA. For example, IDS of aux standalone at input power of 10 dBm (off-state) is 0. After combined in full DPA, the current of aux at the same input power increased to 114 mA. I do not understand why it increased? Can you please give your opinion on this? Thanks in advanced
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top