ATTiny2313 and 4 7-segment display with DS1820

[d_a_l_3]

attiny2313 project

Hi

I have one little problem, I making this schematic
**broken link removed**

But I have to use ATTINY2313 instead 90S2313

Code is there but I can't figure it out what I have to change to work with ATTINY2313

Can someone help me here!!!!

PS. Only display 34C and after five sec my temp is -9C and temp in my room is 23C

Added after 4 hours 52 minutes:

I have found solution for this my problem!!!!!

I have set fuses like on this pic

**broken link removed**

Enoy in ATTINY2313

 

[vmaxusb]

attiny2313 schematic

Hello,
Can you place what was the problem?
Because I also need to use ATTINY 2313 Inplace of 90S2313 in one of my project.
So, What Changes has been made while using ATTINY2313.

Thank You...
---------

vmax

 

[d_a_l_3]

attiny2313 7 segment

I have post picture in previous post...
In my case fuses were problem, post your project and I will help U.

Also and few modification in code you have to change
This is pdf from atmel

AVR093: Replacing AT90S1200 by ATtiny2313
https://www.google.com/url?sa=t&ct=...eaU7bpPpRBIzTDy5g&sig2=ptWRaKRjAE18IeL9paVtZQ

 

[kodalo]

Re: attiny2313 7 segment

I have post picture in previous post...
In my case fuses were problem, post your project and I will help U.

Also and few modification in code you have to change
This is pdf from atmel

AVR093: Replacing AT90S1200 by ATtiny2313
https://www.google.com/url?sa=t&ct=...eaU7bpPpRBIzTDy5g&sig2=ptWRaKRjAE18IeL9paVtZQ

So, what you have change? I am also interested for same project (hex file will be welcome)