Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

aluminium as a groun plane and silicon as a substrate

Status
Not open for further replies.
S

sahar20

Member level 1
Member level 1
Joined
Apr 28, 2007
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,525
how could i use aluminium as a groun plane and silicon as a substrate for similation on mgrid?
 

You can just define the No.0 layer with the conductivity of alumninum and the No.1 substrate with the Er of silicon in Basic Parameters.
 

    S

    sahar20

    Points: 2
    Helpful Answer Positive Rating
If you know the Er of the silicon can you share to me


Thanks
 

According to this **broken link removed** it is between 11.0 and 12.0 but you really need to verify the exact value with the foundry as it would depend on their process.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top