Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ADC- Digital Equalizer ?

Status
Not open for further replies.

unlimited.scorpion

Newbie level 3
Newbie level 3
Joined
Apr 30, 2010
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Alexandria, Egypt, Egypt
Activity points
1,306
hi all ,

i can't realize the idea of connecting the ADC to Digital Equalizer ?

as i know Filter gets discrete values of signal , but here ADC gives ((bits)) representing the value and not the value itself

in different papers they simply draw a line from ADC with N and introduces it to the Digital Equalizer !

how they are doing it ? how to manipulate the N-bits lines ?

thanks
 

i suspect the equaliser you are referring to is probably some sort of DSP chip which does math calculations on the input data to do its job. Fourier (FFT/ DFT) analysis is common, and also FIR/ IIR filter implementations.
 

actually yes it is FIR filter, image of system is attached

and FIR filter is called FFE "feed forward equalizer" for its purpose

i am thinking of it on the circuit level ?, as my team is required to design Rx for High speed serial interface in our Graduation Project

https://obrazki.elektroda.pl/7398354300_1355764575.jpg

many thanks for reply
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top