Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

AC and DC voltage and current sensors

Status
Not open for further replies.

OunaLypse

Member level 2
Member level 2
Joined
May 21, 2012
Messages
50
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Location
Bushbuckridge, Mpumalanga, South Africa
Activity points
1,519
Hi, Eda_family

I need sample instruments/designs that are using AC and DC voltage and current sensors.

I would like to use them along with NI-DAQ system to monitor my Solar power station.
 

use the ACS714 current sensor , it can handle up to 30A (choose the bidirectional model to measure AC- and DC ), and higher current models are available . the output is analog and can be connected to any data aquasition system with analog input .
regarding the voltage sensing you can use simple voltage divider and for the AC voltage , you have to rectify first by a diode bridge .

and if you want ready to use staff check this : https://www.robotshop.com/current-voltage-sensors.html

hope that helped

regards
 
hi
i need learning about sensors
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top