Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

about fir filters and multiplication and speed and it's perfomance

Status
Not open for further replies.

kannan2590

Member level 4
Member level 4
Joined
Sep 1, 2012
Messages
77
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
india
Activity points
2,321
i have implemented fir filter in direct form 1 and it's transpose in VHDL using xilinx software.Now the question is which filter that is direct form 1 or it's transpose form will perform faster and how to check the speed of the filter in xilinx sofware . Again how to improve the performance of the multiplier in these filters?
 

1) You can check the speed by running a simulation
2) If you are using dedicated multipliers, there is nothing you can do to improve their speed; the only thing you can improve is the speed of the logic external to the multipliers.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top