maverick09
Member level 4
Hi,
I am trying to simulate a simple coupled microstrip line with NO ground. The dimesions of the microstrip lines: w=0.25um,thickness= 0.05um, spacing=0.32um(only for simulation), height of the substrate is 0.1um. I wanted to know the type pf port to use . However I am using waveport, do i need to enclose the structure in air-box. Please let me know how can I define an integration line,i.e. should it be the whole length as the port or from the bottom of the port to the condcutors?..
Thanks for help
I am trying to simulate a simple coupled microstrip line with NO ground. The dimesions of the microstrip lines: w=0.25um,thickness= 0.05um, spacing=0.32um(only for simulation), height of the substrate is 0.1um. I wanted to know the type pf port to use . However I am using waveport, do i need to enclose the structure in air-box. Please let me know how can I define an integration line,i.e. should it be the whole length as the port or from the bottom of the port to the condcutors?..
Thanks for help