a lot of different between Schematic and EM simulation in ads

[Dummyeng]

i made a circuit first in schematic and then in momentum

but it needs again a lot of tune

is it correct that after em simulation i should again tune my circuit or i made a mistake

Filebin :: bin abufpatcpt5gpghc

Upload files and make them available for your friends. Think of it as Pastebin for files. Registration is not required. Large files are supported.

filebin.net

 

[volker@muehlhaus]

Why don't you create a packaged project, then ZIP and attach the files here?

 

[Dummyeng]

Why don't you create a packaged project, then ZIP and attach the files here?

i archive it and upload there
i couldnot upload that file here (because **broken link removed** ) so i did it
what should i do?

 

[BigBoss]

NXP Design Kit is outdated.It can be used with ADS2016 not newer.
There is also a missing Library..

 

[Dummyeng]

NXP Design Kit is outdated.It can be used with ADS2016 not newer.
There is also a missing Library..

my tr is mrf13750 and
you can download design kit and models from here

Models for ADS: Keysight Advanced Design System | NXP Semiconductors

and design kit up to 2020 is https://www.nxp.com/webapp/sps/down...&appType=file1&location=null&DOWNLOAD_ID=null

you need to have only two library 1- design kit 2- ADS model (https://www.nxp.com/webapp/sps/down...&appType=file1&location=null&DOWNLOAD_ID=null)

 

[BigBoss]

ADS Model needs a registration.If you have an account, download for ADS2021 Update1 and place it somewhere.
I have downloaded Design Kit, no problem.

 

[Dummyeng]

ADS Model needs a registration.If you have an account, download for ADS2021 Update1 and place it somewhere.
I have downloaded Design Kit, no problem.

nxp doesnt have any designkit for 2021 i put ads model and the last design kit here
i dont know u can run it in ads2021 or not
i prrefered use 2021 for ws probe but there rnt some library for 2021

by the way you can see my schematic and layout do u see any mistake?

 

[BigBoss]

Warning detected by hpeesofsim during netlist parsing.
Model 'NXP_MRF13750H_FET2.FET2M1' (defined in file 'C:/ADS_USER/Design Libraries/MRF13750H_Level1_Rev1_DK//circuit/models/nxp_MRF13750H_pkg_netlists.net' around line 30): 'FSLRFPK_FET2' is an undefined primitive device.
Error detected by hpeesofsim during netlist flattening.
'NXP_MRF13750H_FET2.FSL1' is an instance of an undefined model FET2M1.
Status / Summary


hpeesofsim (*) 531.update1.0 Oct 31 2020, MINT version 5
(64-bit windows built: Sat Oct 31, 2020 17:36:43 +0000)
--------------------
Simulation terminated due to error.
--------------------