kak111
Advanced Member level 4
Welcome to usbpicprog, an open source Microchip PIC programmer for the USB port.
As the therm “open source†implies, the hardware design, the software and the firmware are all available for download free of charge.
PC Software
Usbpicprog is capable of opening .hex files from any compiler / toolchain.
The PC application communicates to the usbpicprog hardware in order to burn the hex file into the target device.
The application can be used within Linux, Windows and Mac.
Hardware
The hardware is built around a microchip PIC18F2550, this microcontroller has on board USB capabilities.
The schematic and PCB have been designed in Kicad, an open source EDA solution
The PCB files are available in Gerber format and the schematic in pdf in the download section
so that you can open them with your favourite tool.
0.4.2 is out! Date : 30-05-2011
usbpicprog » Supported devices
usbpicprog >> HOME
.................................................................................
As the therm “open source†implies, the hardware design, the software and the firmware are all available for download free of charge.
PC Software
Usbpicprog is capable of opening .hex files from any compiler / toolchain.
The PC application communicates to the usbpicprog hardware in order to burn the hex file into the target device.
The application can be used within Linux, Windows and Mac.
Hardware
The hardware is built around a microchip PIC18F2550, this microcontroller has on board USB capabilities.
The schematic and PCB have been designed in Kicad, an open source EDA solution
The PCB files are available in Gerber format and the schematic in pdf in the download section
so that you can open them with your favourite tool.
0.4.2 is out! Date : 30-05-2011
usbpicprog » Supported devices
usbpicprog >> HOME
.................................................................................
