Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

915 Mhz mixer design - need deliverables to carry it out

Status
Not open for further replies.

polag

Junior Member level 2
Junior Member level 2
Joined
Oct 13, 2005
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,422
915 Mhz mixer design

pls I just got this project and nees all the deliverables to carry it out...pls help
 

Re: 915 Mhz mixer design

Did you receive any specs along with the project?
 

915 Mhz mixer design

The HMC483MS8G & HMC483MS8GE are high
dynamic range passive MMIC mixers with integrated
LO amplifi ers in plastic surface mount 8 lead Mini
Small Outline Packages (MSOP) covering 0.7 to 1.4
GHz. Excellent input IP3 performance of +33 dBm for
down conversion and +30 dBm for up conversion is
provided for 2.5G & 3G GSM/CDMA applications at
an LO drive of 0 dBm. With an input 1 dB compression
of +24 dBm, the RF port will accept a wide range of
input signal levels. Conversion loss is 9.0 dB typical.
The DC to 350 MHz IF frequency response will satisfy
GSM/CDMA transmit or receive frequency plans
confi gured for low side LO. The HMC483MS8G &
HMC483MS8GE are pin for pin compatible with the
HMC485MS8G & HMC485MS8GE which are 1.7 -
2.2 GHz mixers with LO amplifi ers.
Parameter Min. Typ. Max. Min. Typ. Max. Units
Frequency Range,
 

Re: 915 Mhz mixer design

yendori said:
Did you receive any specs along with the project?

No I have not received any specs

Added after 2 minutes:

i think I need to design using diodes or tansistors
i will be very happy to get the circuit design
 

Re: 915 Mhz mixer design

Yeah, just use a HMC483MS8G. Then wait for a response. Engineering at its best.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top