bluelaser
Member level 1
I want to change the 3.3 v output to 5v output , but should still
keep the 25mA current driving capability,because I need to drive motor.
I have used 74HCT245 ,and 74FCT245 , but the current is not
enough.
Note that the output should not be the open-drain , such as ULN2003, but
the port like MCU I/O port.
If anyone know some chips or another method, I am very glad to accept
your reference!
Thanks a lot!
keep the 25mA current driving capability,because I need to drive motor.
I have used 74HCT245 ,and 74FCT245 , but the current is not
enough.
Note that the output should not be the open-drain , such as ULN2003, but
the port like MCU I/O port.
If anyone know some chips or another method, I am very glad to accept
your reference!
Thanks a lot!