bkd
Full Member level 2
Does anyone have low power 27MHz amplifier (working below 9V Vdd) ( for transmit signal up to 100m). I found MIC919. IS this okie for this application
THank for reading
THank for reading
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Do you guy have step by step design instruction for ADS or AWR
---------- Post added at 07:59 ---------- Previous post was at 07:13 ----------
In designing this amplifier , did we use S parameter method to design. Or we use what kind of design method
Anyone know Why the circuit don't need the base bias?Definitively the impedance of a small antenna is not 50 ohms at 27MHz.
Impedance matching at 27MHz is not complicated (anyway much simpler than 11GHz). At this frequency you can do the experiment using trim caps before designing the final impedance matching network (as in the application below).
**broken link removed**