Senel
Newbie level 2
Hi,
Can I please know how to give a clock of 100 MHz on the Virtex 5 LX110T? (http://www.hitechglobal.com/boards/v5pciexpress.htm)
The crystal says that it is 50 MHz and even when I give 100 MHz on the timing constraints file, my code on the board runs at 50 MHz(I checked this with a counter). I m using the J16 pin, which is the oscialltor externally fixed.
I want to know how to give a 100 MHz clock.
Thank you
Added after 7 minutes:
By the way I m using the board in Standalone mode and programming with the JTAG
Thanks
Can I please know how to give a clock of 100 MHz on the Virtex 5 LX110T? (http://www.hitechglobal.com/boards/v5pciexpress.htm)
The crystal says that it is 50 MHz and even when I give 100 MHz on the timing constraints file, my code on the board runs at 50 MHz(I checked this with a counter). I m using the J16 pin, which is the oscialltor externally fixed.
I want to know how to give a 100 MHz clock.
Thank you
Added after 7 minutes:
By the way I m using the board in Standalone mode and programming with the JTAG
Thanks