Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Changing the distance of a dipole array design on HFSS

Status
Not open for further replies.
S

saif haider

Full Member level 1
Joined
Mar 28, 2007
Messages
96
Helped
11
Reputation
22
Reaction score
10
Trophy points
1,288
Location
Pakistan
Activity points
1,904
i made a dipole antenna and when analyzed i got the desired result now i want to make another dipole antenna at distance of lambda/4 to first dipole. what shall be best to have the dipole antenna at the desired distance. i used the DUPLICATE>MIRROR command but their was no use so i move one to array command, i used REGULAR ARRAY command but it also not help me getting the desired result
 

Re: dipole array on hfss

I have to do something similar too.
But I still have problem on simulating the antenna, which is the procedure u used?
Thx
 

dipole array on hfss

HFSS regular array works fine with dipole array, make single dipole at origin and use the array setup, you dont need to have two or more anteenas physically just draw one and use array setup.
 
  • Like
Reactions: mkhan

    M

    mkhan

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top