Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Construct a 200MHz oscillator

Status
Not open for further replies.
P

packet

Junior Member level 1
Joined
Sep 25, 2002
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
76
200mhz oscillator

Could anyone tell me how to construct a high-frequence(200MHz)
circuit if don't use PLL? RC or Ring oscillator can contribute
my wanted? The accuracy can be acceptable on +/- 15% tolerance.
Thanks a lot.
 

200 mhz oscillator

Hi packet,

such an oscillator could be built in different ways. An easy possibility is a colpitts LC-oscillator. Look at this page (https://www.electronics-tutorials.com/oscillators/colpitts-oscillators.htm), there are some explanations about. You can also build a VCO with this osci-type. The choice a transistor depends on your needed outputpower. A BFP0405 or BFP-0420 gives you surely above 0dBm.

Bye
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top