Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP!!!GOOD PIC PROGRAMMER

Status
Not open for further replies.
D

DavidNelly

Member level 5
Joined
Sep 8, 2006
Messages
90
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
1,814
propic2 in winpic800

Hello colleagues,
Can you suggest me which is the good PIC programmer to buy ?
It should be that can program many models ( 16F/Cxxx, 18F/Cxxx ).
Thanks
 

propic2 18f

Hello DavidNelly


I have the Winpic800 and for me is one of the best pic progrmmers.

Also program AVR
 

what is the best pic programer to buy

How much have you budget for ?

Best is ICD2.
 

propic2 18f4550

GTP-USB+ is an excellent programmer.

ht*p://www.winpic800.com/index.php?option=com_content&task=blogcategory&id=19&Itemid=88
 

DavidNelly said:
Hello colleagues,
Can you suggest me which is the good PIC programmer to buy ?
It should be that can program many models ( 16F/Cxxx, 18F/Cxxx ).
Thanks
Click to expand...

DavidNelly,

If you really want to buy a good programmer, I suggested to you the Microchip ICD (In Circuit Debugger). This is a debugger, and a programmer too. It's a very good equipment. I have a PICSTART+ but a friend have ICD and it's a very powerfull tool.

If you decided to build your own, you culd start using Propic (www.propic2.com) with the ICProg software (www.ic-prog.com/index1.htm).

By,

Guillermo (AR)
 

check olimex they offer a schematic that you can build your self or you may buy it from them
www.olimex.com
 

Try this

I've put here everything needed to build the programmer.
 

DavidNelly said:
Hello colleagues,
Can you suggest me which is the good PIC programmer to buy ?
It should be that can program many models ( 16F/Cxxx, 18F/Cxxx ).
Thanks
Click to expand...

If you want to do an easy programmer, I recomend you the "PG2C" programmer, by Olimex. It's a very easy to do programmer. All that you need to know is the pic programmer pin (MCLR,VDD,PGD,PGC,PGM). It use the serial port.

I'm using the "propic2" programmer. It's a litle more complicated, but it have external power (i don't have the schematic, but if you need it, i search for it).

To use the propic2 with WinPic800 software, you must to do some configurations, i show you in the second image.

I have an usb programmer, it's a litle complicated to do and i don't prove it. If you want it, i'll upload it.
 

Ho-Lo Systems is the best choice which support most of MCUs.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top