Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Add/Replace New Hardware in RH8.0 or 9.0

Status
Not open for further replies.
J

johan_tr2000

Full Member level 1
Joined
Jan 7, 2002
Messages
98
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
763
Hi,
May be this is stupid questions :

If I replace / add some new HW (like NIC, Sound Card, VGA Card, etc) on my comp which running Linux RH8.0 or 9.0. Do I have to resinstall the RH, or the Linux will recoqnize the new hardware that I added or replaced?

Thx + Rgds,
Tr2000
 

johan_tr2000 said:
Hi,
May be this is stupid questions :

If I replace / add some new HW (like NIC, Sound Card, VGA Card, etc) on my comp which running Linux RH8.0 or 9.0. Do I have to resinstall the RH, or the Linux will recoqnize the new hardware that I added or replaced?

Thx + Rgds,
Tr2000
Click to expand...

If you are running Kudzu at boot time, It usually recognizes
otherwise you can run Kudzu manually.
 

Yes, probably you are running kudzu so if the Linux distribution supports the new hardware it will recognize it and will install it.

If the drivers are not include you will not do anything reinstalling the Linux OS, you will have to download the drivers, recompile and install them or, in some cases add their support into your kernel recompiling it.

Katos
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top