Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

programming many devices simultaneously

Status
Not open for further replies.
B

btminzon

Full Member level 2
Joined
Jun 12, 2006
Messages
122
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Location
Brazil
Activity points
2,140
Hi,

does any one knows how to program 3 devices in the same board, using 3 diferents program files? i´m using quartus II and two 3032 and one 3064. Thanks!!!
 

you can hook them up in tothe JTAG chain, and then program. Not sure why you have thre devices not just one something like MAX II EPM 240....
Good lack
 

Hi
i am not aware how to do in quartus tool. but in xilin you can do it with impact tool from xilinx. initialise the jtag chain and then you can configure diff devices with diff progaming file. does ur card have some smart media or any other programing method like serial or usb. that might also help.

thanks
tama
 

hi,
Quartus has tools "PROGRAMMER" for programming same as "IMPACT" in ISE.
Use auto detect mode for getting chain,then program device by alternatelly .bsdl files for bypassed device & programming file for othes.

Regards
alt007
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top