Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FET output resistance (Lambda) at BSIM3.3

Status
Not open for further replies.
J

Jim cage

Full Member level 2
Joined
Jul 2, 2006
Messages
149
Helped
13
Reputation
26
Reaction score
6
Trophy points
1,298
Activity points
2,185
bsim3 lambda

Hi,

Does anybody knows what is the lambda on the Bsimv3.3?

The motivation for the question is to find out the output resistance of a mos transistor which is : ro=1/lambda*Id.

It seems that the bsimv3.3 manual does not specifiy this lambda value.

Can anyone help me?

Thanks
 

bsim3 output resistance channel length modulation

anybody?
 

jfet lambda calculate

there is no such parameters in the Bsim3.3. However, you can get it from the ID vs. VD curves as it defined.
 

output resistance ads

Hi
lambda is simplification
You should simulate IV interpolate with line and obtain lambda
It is good for hand calculation but is not exact.
 

output resistance= lambda id

lambda is the channel length modulation factor , but it isn't in BSIM3v3

it is in level one mosfet model , for hand calculations

khouly
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top