Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RASTER vs. VECTOR artwork in ALLEGRO

Status
Not open for further replies.
C

chekunidze

Newbie level 4
Joined
Nov 1, 2005
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Russia
Activity points
1,316
Hello to all!

who knows, how to make RASTER artwork in allegro? :(

now allegro makes artwork in VECTOR format, because of it in CAM350 and
other tools are split my layers in different layers (for example, masks, conductors, shapes, shapes boundaries etc.)

How to combine it? or how to make RASTER artwork

thanks/спасибо
 

You have it backwards - composites are raster, but here's how to fix it.

Load the composite layers, (one at a time is easiest), into CAM350, use Utilities - Convert Composite - this will create a single layer from the composite, export the resultant layer to the same name as the one imported - problem solved.

This problem is unique to only a few cam packages - a lot of them will automatically convert to a single layer.

SiGiNT
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top