Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Chloride EDP-50 UPS Service Manual

Status
Not open for further replies.
L

Latang

Newbie level 2
Joined
Jul 28, 2006
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,295
ups service manual

Just wondering if anyone out there has a digital copy of the edp-50 manual, hundreds of edp-70 resources out there, but the edp-50 is 3 phase to single phase so the termination is entirely different. Our unit is coming up with a zero reserve input voltage, and there are no marked terminals for the reserve input so we can't even give it a supply yet.

Thanks in advance guys

Mat.
 

chloride edp 50

hi pls chek below






thanks
 

chloride edp 50 service manual

Hehe, that post was what brought me to this forum, but bosco isn't answering his private messages sadly :( Couldn't find any links to files or web addresses in the post, so I'm hanging on his return, thought I'd see if any others out there had em.
 

as i know reserve supply and main input rectifier is the same as well as the maintenance by-pass. just a wild guess with a bit of confidence i think you should connect the wire of reserve supply from mains input then connect it to transfer switch of the ups if you can locate the board.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top