Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC16f84 + programmer

Status
Not open for further replies.
K

k1_zav

Junior Member level 2
Joined
Mar 13, 2005
Messages
23
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,460
Hi there.
I want to use a programmer for 16f84 that I downloaded from icprog.com.
It doesn't work. it programs the uC and then at the verification it fails.

I have tested at least 4 programmers before and all of them have the same error. So I think something is wrong with this.
:cry:
Who can help me to fix this problem or at least anybody can give me a new schematic for this kind of programmer.

Thanks in advance.
 

Did you turn on code protection?

And have you got "Verify after programming" checked, in Settings > Options > Programming?

I don't use 16F84 any more, but I got that verify error a couple of years ago.

Cheers,
 

The problem should be with the Programming Hardware. Try uJDM Programmer, search i google.
And for the ICPROG software you should enable the driver (Win2K/WinXP/Win2K3) in the settings.

I hope this will work for u.

Regards,
PRAVARDHAN
 

Hi All
I used programmer for PIC ALL
Its very good for all windows
htt://www.propic2.com

:D
 

Hi
the programmer that saas123qa has sent is JDM programmer.
but K1_zav
please say what is the error message?
good luck.
 

such a error problem is also with me, on JDM programmer, i think the capacitor how charge 13V for program, discharges before the uC programe completes , so we found random number of errors when verify
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top