Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to change the wave's axis in Hspice and Spectre?

Status
Not open for further replies.
H

holddreams

Full Member level 6
Joined
Aug 2, 2005
Messages
351
Helped
15
Reputation
30
Reaction score
7
Trophy points
1,298
Location
Shanghai
Activity points
4,237
spectre cosmoscope

I want to get the wave like this:
x-axis is 2Id/gm
y-axis is Id.

How should i do in hspice and spectre?

thanks.
 

how to plot a wave with hspice

For Spectre (Analog Artist)
Plot Id vs. Vgs.
Using calculator plot deriv(Id).
Divide ("/").
In Waveform window select Axis -> X Axis -> Plot vs. and change from "Independent" to "deriv(Id)/Id".
Good luck.
 

plot on one graph cosmoscope

It is difficult to do X-axis unit change as I know . But it is easy change Y-axis, just use command in awaves .
 

spectre plot x axis

holddreams said:
I want to get the wave like this:
x-axis is 2Id/gm
y-axis is Id.

How should i do in hspice and spectre?

thanks.
Click to expand...

i do this in that way in hspice and awaves.

first i declare parameter xtmp which is avaiable in params in awaves results browser

.probe xtmp = par('2*i(m1)/gmo(m1)')

thereafter i pull xtmp using middle mouse button to current x-axis

if you knew, how to do it in cosmoscope using calculator, please, let me know
 

change unit hspice

first
.dc vgs start stop step
.probe par1=par('2*i(m1)/gmo(m1)')

after simulation
Awanwaves->Result Browser->select par1 in curves
then in 'current X-axis', click 'Apply', this change X-axis from 'vgs' to 'par1';
double click i(m1) in Result Browser,you will get
X-axis: par1
Y-axis: i(m1)
 

hspice 2id/gm

jutek said:
holddreams said:
I want to get the wave like this:
x-axis is 2Id/gm
y-axis is Id.

How should i do in hspice and spectre?

thanks.
Click to expand...

i do this in that way in hspice and awaves.

first i declare parameter xtmp which is avaiable in params in awaves results browser

.probe xtmp = par('2*i(m1)/gmo(m1)')

thereafter i pull xtmp using middle mouse button to current x-axis

if you knew, how to do it in cosmoscope using calculator, please, let me know
Click to expand...

That is a method in spectre. If you want to change x-axis in csope, as I know, there is no good method. I always do like that:
1 plot two waves in same graph, one is A, the other is B
2 if you want to change x-axis to A
3 right click on name of A(on the right side of graph), choose view->horizontal vlue->real (y)
4 then there will be two x-axis in this graph. one the the original, the other is A
It's not convenient like awaves.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top