Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[question] can we use s-parameter files in different softs?

Status
Not open for further replies.
W

woshifanka

Full Member level 1
Joined
Jun 13, 2005
Messages
97
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Activity points
2,145
Dear all :
i have a question:
if i build a antenna's model and run it in HFSS. then i can get the s-parameter file .
now , can i import the s-parameter file into other softwares to do further processing ?
for example , from Hfss to ie3d ?
appreciate your reply .
rgz
kaka
 

Of course...
S-parameters a set of linear characterization of a system under the certain operating point or conditions such as characteristic impedance ,terminations etc. So, s-parameters are universal "definition" method either active or passive circuits.
S, you can use these sets under different simulators.
 

Re: [question] can we use s-parameter files in different sof

If you save S-parameter into standard file format such like touchstone format,
it can be used by any EDA program which provides import function.
 

To bigboss and ajhsu:
thank you very much for your replys
kaka
 

Re: [question] can we use s-parameter files in different sof

See this link for the Touchstone format:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top