Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Harmonic balance simulation issues with feedback oscillator

Status
Not open for further replies.
R

redhat

Advanced Member level 4
Joined
Aug 1, 2004
Messages
116
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,296
Location
Egypt
Activity points
979
i have simulated the feedback oscillator found in this tutorial using ADS and it worked well
**broken link removed**
when i changed the values of the resonator to resonate at another frequency the open-loop analysis was good but for the closed-loop analysis the harmonic balance simulation has no output, what could be wrong? note that K, S(2,1), Maxgain has good values

regards
 

Re: Feedback Oscillator

Have you checked that you have more reflection gain than the resonator loss? and secondly have you checked the phase is zero? Or that the phase looking into the resonator is opposite sign (but same value) to that looking into the reflection oscillator??
 

Re: Feedback Oscillator

the problem is that S11 of the resonator is -35db and the amplifier gain is 10db, is there another way than increasing the amplifier gain to have oscillation? the resonator losses is too high,maybe i should change the coil to have higher Q, will this solve the problem?
 

Re: Feedback Oscillator

Dear Redhat

i have simulated the file u sent , and it give a good results

see the attachment
also to know when the oscillator will fail , try to tune the valuse of the resonator

wish this help

khouly
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top