Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Antenna Gain Pattern vs. Frquency

Status
Not open for further replies.

KawtherHamad

Member level 1
Joined
Feb 15, 2015
Messages
37
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
276
Hello All,


Can you please help me in obtaining an antenna gain pattern. After selecting the Creating Far Field Plot --> Rectangular Plot --> Category (Gain). What are the other things that i should determine to get Gain vs. Frequency pattern?


Thank you
Kawther
 

Hello All,
Can you please help me in obtaining an antenna gain pattern. After selecting the Creating Far Field Plot --> Rectangular Plot --> Category (Gain). What are the other things that i should determine to get Gain vs. Frequency pattern?
Thank you
Kawther

There is not going to be any gain Vs freq pattern. The freq isn't going to change unless you change the frequency of the transmitter that feeds the antenna

if that isn't what you are getting at, then please state a little clearer


Dave
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top