Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

6 to 10W, 120Vac to 15Vdc Isolated OTS power supply that operates (starts) at -40F

Status
Not open for further replies.
J

Jester

Full Member level 6
Joined
Aug 18, 2012
Messages
377
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,298
Location
.
Activity points
4,754
I have been searching for either an open frame or brick type power supply with the following specifications:

Power: 6W
Input Voltage: 120Vac
Output Voltage: 15Vdc
Isolated (minimum 1500V)
Must start at -40°F

Nothing from CUI or RECOM, there must be something out there?

Does anyone know of such a part?
 

E.g. KAM0715F from chimfa.com, Recom RAC10-15SB
 
  • Like
Reactions: Jester

    J

    Jester

    Points: 2
    Helpful Answer Positive Rating
**broken link removed**

the above says -40 but with derating, I reckon you have to build yourself and not use electrolytics in it, because lytics have big esr at low temp.
Either that or put a no-cold one in a box with a heater and temperature sensor.
 
  • Like
Reactions: Jester

    J

    Jester

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top