Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

X LINK ERROR in IAR for MSP430 family

Status
Not open for further replies.
S

suryakant

Member level 5
Joined
Mar 10, 2005
Messages
90
Helped
6
Reputation
12
Reaction score
0
Trophy points
1,286
Location
India
Activity points
2,171
error[e16]: segment cstr

hi all,

I m using IAR tool for my software
i m debugging 1 code where after few modifications i encounered following problem
while linking.

Please help me to overcome it.
Thanks.


Making target Debug...
Linking...
Error[e16]: Segment CSTR (size: 0x28d align: 0x1) is too long for segment definition. At least 0x52 more bytes needed. The problem occurred while processing the segment placement command "-Z(CODE)CODE,CDATA0,CONST,CSTR,CCSTR#2A00-FFDF", where at the moment of placement the available memory ranges were "2a00-2c3b"

Total number of errors: 1
Total number of warnings: 0
 

segment cstr is too long

check that your memory did not exceed the target MSP430 mcu . You can check it by choosing bigger mcu from same family and try to compile your code again .
 

segment cstr is too long

Hi,

Te most easy way to find out your problem, is to try and add one line at a time and compile. At the end you will find out what is causing the problem.
It looks like you are having a problem with your interupt vectors.
See the same problem from this user:
**broken link removed**

Good luck.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top