Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] eldo spice operating point of mosfets

Status
Not open for further replies.
D

Dino1400

Full Member level 1
Joined
Sep 22, 2010
Messages
95
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,941
hello everyone,

I'm running a spice simulation of a two-satge opamp I would like to see if the NMOSs and PMOSs are operating in saturation region any

line that can display that ether in log file or ezwave that shows the transistors opearing point


thank you in adavance
 

Hi,

This feature exists in Cadence Spectre, but, at the moment, it seems that spice is lacking this feature.
At least, you can print vgs, vth and vds, but you have to determine operating point by yourself.

If I am wrong, I am also very interested in a way to do that (especially with ngspice).
 

SPICE operation point info usually shows vds and vds-sat. Saturation region operation means vds > vds-sat .
 
Last edited:

I just find out that in eldo we can use something like
.extract label=XNM1_VDS VDS(XOPAMP.XNM1.MAIN)
.extract label=XNM1_VGS VGS(XOPAMP.XNM1.MAIN)
.extract label=XNM1_VTH VTH_D(XOPAMP.XNM1.MAIN)
to extract the Vds and Vgs ...etc
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top