Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Which solver to use by CST STudio

Status
Not open for further replies.
J

jamesy

Newbie level 6
Joined
Jan 15, 2015
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
73
Hey ,

i need some help. im simulating two antennas in a cavity box, i first do it with the transcient solver and after with the frequency becuz i wanted to see if the results will be the same .. but they are some difference at some frequencies .. i will like to ask which solver should i use ? what is the right for my application ? which results should i trust? Antennas_in_box1.pngchannel_transfert_fonction1.png
 

Generally transient solver is used and it is best when design dimension are more then wavelength of operation (its able to solve most of design ) its fast in solving.
Its as per my knowledge
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top