Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Help me build a Basic PIC24 Board

Status
Not open for further replies.
S

srikanth977

Newbie level 5
Joined
Jan 11, 2012
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,349
Hi all,
This time I am stuck with the PCB for PIC24FJ64GA004.

I have to build a basic board (Crystal oscillator,MCLR circuit, capacitors as per datasheet, and Programming pins)

I am leaving few pins to a connector so that i can connect PICKIT3 and program the controller.

My doubt is regarding the programming pins for controller.
I am using the MCLR, PGED1(Pin21) & PGEC1(Pin22) respectively for programming.
Is this enough or i should also use EMUDx pins?
Please confirm.
 

Never forget to ask google first
Array.jpg
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top