Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Working with Isis and Ares

Status
Not open for further replies.
C

carlmart

Newbie level 6
Joined
Feb 3, 2015
Messages
11
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
104
I am loading an schematic design I have made into Isis, to then convert into a pcb with Ares.

Just to do a simple test for the conversion, even if the schematic is just beginning, you seem to generate a netlist first to go to Ares.

I mean, I press the Ares red button, but when Ares does open I don't get anything. There's probably something I am not doing in Isis.

How should I proceed?
 
Last edited:

In ARES will get you what your had used in ISIS schematic design...click on ARES it open a Black window..@left side you find the component window..it will present...if don`t find right click-->Place-->Component....
 

OK, I haven't finished the schematic yet, so I can't load the whole design into Ares yet.

What I tried now and worked is placing the parts in the black window.

Let's go back a bit to schematic: I have been trying to modify and/or create some missing parts, but I was not too successful. How do you to add a component you designed into the library?
 

In ARES you find out library in main menu...library-->library manager-->create library.in create add a component value & resonant...and save as.lib
 

OK, I think I understand how you create a part in Ares. But how do I create in Isis?

I tried to use an existing one (SPST) to make a toggle switch with three connections points, but I'm not sure if I made it right.

Should I follow the same path as on Ares?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top