Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Costas loop and 8PSK carrier regeneration

Status
Not open for further replies.
A

adi

Newbie level 5
Joined
Aug 9, 2004
Messages
9
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
34
qpsk costas

On first attached picture is Costas loop which can be used for QPSK carrier regeneration.
After some math, you will get that (for QPSK) e(t) is proportional to phase error (second attached picture).
My question is: can I use this same loop for 8PSK carrier regeneration? If not, how should I modify it?
Thanks in advance.
 

costas loop 8psk

Good initial coverage of MPSK carrier extraction is given within "Digital Communications" by Proakis. There is given a description of generalized Costas loop, too. If you want just to experiment, you can also try to use a QPSK Costas loop, but first you should square the input signal to reduce nuber of phase stages on 4 and at the end divide the frequency of loop synchronized carrier by 2.

Regards,
D
 
  • Like
Reactions: KericWard

    A

    adi

    Points: 2
    Helpful Answer Positive Rating
    K

    KericWard

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top