Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ways to generate interrupts

Status
Not open for further replies.
A

AJAB

Junior Member level 1
Joined
Oct 15, 2013
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
123
Hi,

I am using a SoC which goes into sleep mode for 5 minutes. Now after 5 minutes I need to wake it up using some external trigger. What are the different ways I can implement interrupt generator in hardware?

I can not use timers of SoC, as SoC is in sleep and Timers are not operational in sleep mode.
I thought of RTC, counters or RC network.

Can any one suggest any other options?

Any other options in hardware which can generate periodic interrupt. :roll:

Thanks,
Archana.
 

You have already mentioned the relevant options. In addition, a watchdog or low power timer may be provided by the processor. If you want an exact timing, external RTC interrupt is probably the only reasonable method. I presume, you don't need to sleep the processor for exactly 5 minutes. If power saving is the objective, a sufficient low interrupt rate (e.g. 1 Hz) will have the same effect.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top