Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

guided wavelength and effective aperture

Status
Not open for further replies.

shenbagam

Newbie level 3
Joined
Aug 9, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
4
which is required for estimating effective aperture of an antenna lambda\[\lambda\] or lambda g \[\lambda\]g (guided wavelength)??
 

If you use a horn antenna with a waveguide feeder, then in the waveguide the lambda is the guide wavelength and outside horn aperture the lambda is in the air. The horn or another antenna transforms the guided wave into the free-space wave.
Antenna aperture is the geometric aperture of its mouth, rectangular or circular, and it determines appropriate beam width in E ad H plane or in any chosen plane.
 

If you use a horn antenna with a waveguide feeder, then in the waveguide the lambda is the guide wavelength and outside horn aperture the lambda is in the air. The horn or another antenna transforms the guided wave into the free-space wave.
Antenna aperture is the geometric aperture of its mouth, rectangular or circular, and it determines appropriate beam width in E ad H plane or in any chosen plane.


i just want to know whether lambda or lambda g is used in the eqn D=4\[\pi\]/\[\lambda\]2 *Ae (for the case of dielectric loaded antenna)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top